Stream In

This block is used to read a stream of data from the host computer, and outputs two signal: one containing the data, and one indicating whether the data received is valid.

Ports

Port	Type	Description
InPort	input	the input signal, connected to an input port of the FPGA subsystem
Data	output	the stream of data received from the host computer (uint32)
Valid	output	indicates whether Data is valid or not (boolean)

Target Interface

Connection and interface of this block

Connect InPort directly to an input port of the FPGA subsystem like below.

Assign it to a 'Stream Input' in the interface map (see Generation of the Bitstream file, step 1.3 in the Workflow Advisor; and you need in step 1.2 to choose the number of stream inputs to match your block design).